Greases

Lubricating grease for automotive, maritime and industrial equipment trenched for lubrication of ball bearings, roller bearings, slip bearings and as general lubrication in high load industrial machines, construction machines, generators, presses and the like. We offer Texaco and Anderol grease for maximum protection and smooth operation, as well as protecting all vital components from daily stresses and extreme operating conditions.

Biogrease Heavy EP2 New

Newly developed biodegradable universal fat based on synthetic
ester and anhydrous calcium soap. Especially suitable for lubrication of high
loaded slides and roller bearings and in corrosive environments. Can with
Advantage is used in maritime applications, entrepreneurs, agriculture and
forest machines where there is a danger of wildlife.

Product / Data sheets

PDS_Biogrease_Heavy_EP_2 (PDS is comming)

SDS_Biogrease_Heavy_EP_2

Copper Grease 9143, (alternative to Threadtex Li)

Copper fat with bentonite thickener, added very fine copper powder
to protect thread connections that will be screwed over and over again
times. Very good adhesion, corrosion protection and water repellency.

Coupling Grease

Lithium / Polymer special grease for flexible couplings, eg.
buetannkoblinger. Extremely good attachment even at high
rpm.

Marfak 00

Long-fiber sodium fat with high adhesion and carrying capacity calculated for
low speed sliders. Suitable as a chassis on rolling old material. Not for wheel bearings. Sensitive to water.

Product / Data sheets

Marfak Heavy Duty 2

Long-fiber sodium fat, especially suitable for several Svedala-Arbro
Milling. High-viscosity base oil that ensures good film thickness.
Sensitive to water.

Product / Data sheets

PDS_Marfak Heavy Duty 2

SDS_Marfak Heavy Duty 2 (SDS is comming)

Molytex EP 2

Universal lithium fat with EP additions and 3% molybdenum disulfide.

Product / Data sheets

Multifak 264 EP 00/000

Semi-flowing fat based on lithium-12-hydroxysateate soap. For
central lubrication systems where NLGI 00 or 000 degree is recommended and i
fat filled give.

Multifak EP 0

Lithium fat recommended for fat filled boxes where oil is not
can be used because of risk of leakage, as well as central lubrication systems
where the lubrication sites are exposed to moderate stresses. For larger
stresses are recommended Novatex Heavy EP 0.

Product / Data sheets

Multifak EP 2

Lithium universal grease for all types of bearings. A reasonable alternative to
Starplex EP 2 or Novatex Heavy EP 2 for lubricants exposed
for moderate stresses.

Product / Data sheets

Multifak T EP 2

Lithium-based, long-fiber grease plant grease. For lubrication of bolts,
joints and slide bearings. Under 0 ° C, the fat should be stored indoors to ease
application.

Novatex EP 2

Calcium fat with extremely good adhesion. Suitable as
universal grease for humid environments, eg in water pumps, turbines and
stern tubes.

Product / Data sheets

Novatex Heavy EP 2

Calcium-based plant fat of the best quality. Both for manual and
central lubrication of slides and roller bearings at moderate speed.
Year-round thickness for 2-wire systems. For summer use in 1-leather
systems. Extremely water resistant and with very good adhesion
by shock and shock stresses. Also suitable for water pumps
where the grease comes into contact with water.

Novatex Heavy EP 0

Calcium-based plant fat of the best quality. Both for manual and
center lubrication of slides and roller bearings at moderate speed.
For winter use in 1-wire systems. Extremely water resistant and with
Very good attachment to shock and shock. Also
Excellent for propeller sleeves on outboard motors, water pumps
where the grease comes into contact with water.

Novatex Heavy M EP 2

Calcium fat with 3% molybdenum disulfide additive and graphite. Same
benefits as for Novatex Heavy EP 2, but can be used on machines
where MoS2 is recommended.

Starplex EP3

Lithium complex universal grease with extremely good adhesion itself
at high temperatures. The fat is recommended when long is desired
lubrication intervals and is therefore particularly suitable for permanently packed
save, Siemens electric motors. Also as wheel bearing grease in “vehicles,
fans and the like where NLGI 3 is prescribed.
Operating temperature -20 ° C – + 150 ° C

Product / Data sheets

Starplex EP 2

Lithium complex universal grease with extremely good adhesion itself
at high temperatures. Operating temperature -35 ° C – + 140 ° C.

Product / Data sheets

Starplex EP 1

Lithium complex universal grease with extremely good adhesion itself
at high temperatures. Operating temperature -35 ° C – + 140 ° C.

Product / Data sheets

Starplex HT 1

Lithium complex universal grease. Recommended especially for cool and
roller bearings operating under high temperatures. Provides particularly good
protection against oxidation and corrosion. It contains in particular
developed EP (Extreme Pressure) additions.

Product / Data sheets

Texando CX EP 2

Calcium complex thickened, water resistant industrial universal fat,
NLGI 2. Well suited for central lubrication systems with a somewhat longer stretch.

Texclad 2

Calcium-based. Water resistant drive fat containing graphite and
molybdenum disulfide. Especially suitable for swingers on semi-trailers
and open swing wreaths on construction machinery.

Product / Data sheets

Synthgrease Light New

Lithium complex synthetic grease based on PAO base oil.
Scope of application is very fast-moving storage such as
fans with two pole electric motors and a revolutionary number of 3000 RPM.
Operating temperature -55 ° C – + 155 ° C.

Product / Data sheets

PDS_Synthgrease_Light (PDS is comming)

SDS_Synthgrease_Light

Synthgrease Medium New

Lithium complex synthetic grease based on PAO base oil. wide
industrial and automotive applications
applications. Application temperature -40 ° C – + 155 ° C.

Synthgrease Heavy New

Lithium complex synthetic grease based on PAO base oil. It
High base oil viscosity makes it very useful for storing
low speed and high load. The synthetic base oil ensures long
lubrication intervals. Operating temperature -55 ° C – + 140 ° C
(short-lived 220 ° C)

Product / Data sheets

PDS_Synthgrease_Heavy (PDS is comming)

SDS_Synthgrease_Heavy

Anderol logo

Anderol 783-2

Full Synthetic (PAO) Aluminum Complex Univesal Grease for lubrication
of equipment in the food industry. Excellent temperature and
høytrykksgenskaper. Is very good against water leaching. nominal
operating temperature -45 ° C – + 160 ° C.
NLGI 2; NSF/H1 registered

Product / Data sheets

Anderol logo

Anderol FGCS 2

Calcium sulfonate complex special grease for lubrication of equipment
in the food industry. Very mechanical stable, large
separation resistance by centrifugation, withstands high load and is very high
good against water leaching. Nominal operating temperature -20 ° C – + 160 ° C.
NLGI 2; NSF/H1 registered

Product / Data sheets

Anderol logo

Anderol OGWR-0

Aluminum complex special grease for highly exposed lubrication sites.
Contains graphite and EP additives to withstand high loads.
Nominal operating temperature -20 ° C – + 200 ° C. Examples of
Applications: Wire lubrication, open drives, turntables, moving
smelting furnaces.

Anderol logo

Anderol PQAA No. 1 Plus

Aluminum complex universal grease for lubrication of equipment
food industry. Nominal operating temperature -20 ° C – + 140 ° C.
NLGI 1; NSF/H1 registered

Anderol logo

Anderol PQAA No. 0 Plus

Aluminum complex universal grease for lubrication of equipment
food industry. Nominal operating temperature -20 ° C – + 140 ° C.
NLGI 0; NSF/H1 registered

Anderol logo

Anderol PQAA No. 00 Plus

Aluminum complex universal grease for lubrication of equipment
food industry. Nominal operating temperature -20 ° C – + 140 ° C.
NLGI 00; NSF/H1 registered