Hydraulic oil for industrial, maritime and automotive equipment. Hydraulic pressure in pumps and valves can exceed 1000 psi, increase metal to metal contact and lead to increased wear and tear. Our suppliers of hydraulic fluids guarantee clean, high quality oils specifically designed to reduce wear and tear.
Rando WM 32
High quality hydraulic oil that is very shear-stable and therefore will withstand high load over time. The oil’s low flow point and excellent Low-temperature properties ensure optimum pumpability and start-up hydraulic systems. The oil has a wide scope and can especially recommended for lubrication of hydraulic systems that work under fluctuating and cold climatic conditions.
Product / Data sheets
Rando HDZ LT 32
Hydraulic oil with particularly good low-temperature properties. Viscosity Index of 200. Exceeds most manufacturers’ requirements. DIN 51524, part 3 HVLP, ISO VG 32. Also suitable for screw compressors where hydraulic oil is recommended.
Product / Data sheets
Rando HDZ LT 46
Hydraulic oil with particularly good low-temperature properties. Viscosity Index of 200. Exceeds most manufacturers’ requirements. DIN 51524, part 3 HVLP, ISO VG 46. Also suitable for screw compressors where hydraulic oil is recommended.
Product / Data sheets
Hydraulic OIL HDZ 15/22/32/46/68/100
Hydraulic oil for outdoor and indoor use. Exceeds most manufacturers’ requirements.
ISO VG 15/22/32/46/68/100
Product / Data sheets
Rando Ashless 8401
Zinc-free hydraulic oil with excellent low-temperature properties. Especially suitable for mobile cranes, lifting belts and other hydraulic equipment operated under very low and varying temperature conditions. ISO VG 32
Product / Data sheets
Clarity Hydraulic Oil AW 46
Zinc-free hydraulic oil for indoor use added special high pressure and non-zinc-based wear additives. Has great resistance to oxidation, very good water separation ability and provides very good corrosion protection. ISO VG 46
Product / Data sheets
Clarity Hydraulic Oil AW 68
Zinc-free hydraulic oil for indoor use added special high pressure and wear additives that are not based on zinc. Has great resistance to oxidation, very good water separation capacity and provides very good corrosion protection. ISO VG 68
Product / Data sheets
Rando HD 10/22/32/46/68/100/150
Hydraulic oil for indoor use and as spindle oil
DIN 51524 Part 2 HLP, ISO VG 10/22/32/46/68/100/150
Product / Data sheets
Hydra 32
Biodegradable hydraulic oil (CEC-L-33-A-93) with a wide application. Based on synthetic ester. Fully miscible with common mineral hydraulic oils. Biodegradability in water do it among other things for the first choice as air tool oil by well drilling. Suitable for a wide temperature range: -30 to +95 ° C.
FZG 12, ISO VG 32
Product / Data sheets
Hydra 46
Biodegradable hydraulic oil (CEC-L-33-A-93) with a wide application. Based on synthetic ester. Fully miscible with common mineral hydraulic oils. Biodegradability in water do it among other things for the first choice as air tool oil by well drilling. Suitable for a wide temperature range: -30 to +95 ° C.
FZG 12, ISO VG 46
Product / Data sheets
Glytex HFC 46 (Het tidl. Uno Fluid HFC 46)
Heavy-duty hydraulic oil on water-glycol basis. Suitable for use where there is a danger of fire in connection with open fire and heat. DO NOT mix with mineral oil.
ISO VG 46
Product / Data sheets
Synstar Hydraulic HFDU 46
Heavy-duty hydraulic oil based on synthetic esters. Suitable for use where there is a risk of fire in connection with open fire and heat. High viscosity index and very good lubricating properties. ISO VG 46.
Product / Data sheets
Hydraulic Oil K
Hydraulic Oil K is specially developed for elevators. Hydraulic Oil K is an effective performance hydraulic elevator oil. It is formulated with premium quality base oils in combination with anti-corrosion additives, anti-wear and anti-foam agents, with an effective performance Viscosity Index (VI) improver. ISO VG 46
Product / Data sheets
Anderol FGH-32/46/68/100
Fully synthetic food-registered hydraulic oil with a wide
application. For systems where there is a danger that the oil may come
in contact with the food. Also suitable for lubrication of bla
hermetizing and tapping machines and as chain lubrication. nominal
operating temperature -35 ° C – + 170 ° C. ISO VG 32/46/68/100
Product / Data sheets
Panolin Atlantis 15
Biodegradable fully synthetic hydraulic oil based on saturated ester with a wide range of applications within offshore and marine. Adheres to strict environmental requirements according to OSPAR for ecotoxicological effects in water. ISO VG 15; HOCNF category yellow, CEFAS OCNS Group E
Product / Data sheets
Panolin Atlantis 22
Biodegradable fully synthetic hydraulic oil based on saturated ester with a wide range of applications within offshore and navy. Complies with strict environmental requirements according to OSPAR for ecotoxicological effects in water. ISO VG 22; HOCNF category yellow, CEFAS OCNS Group E.
Product / Data sheets
Panolin Atlantis N 32
Biodegradable fully synthetic hydraulic oil based on saturated ester with a wide range of applications within offshore and navy. Complies with strict environmental requirements according to OSPAR for ecotoxicological effects in water. ISO VG 32; HOCNF category yellow, CEFAS OCNS Group E.
Product / Data sheets
Panolin HLP SYNTH 32
Biodegradable hydraulic oil with a wide range of applications. The most approved and used environmentally adapted hydraulic oil in world based on synthetic saturated ester. Available in 15-22-46-68 and 100 viscosity. ISO VG 32
Product / Data sheets
Panolin HLP SYNTH 46
Biodegradable hydraulic oil with a wide range of applications. The most approved and used environmentally adapted hydraulic oil in world based on synthetic saturated ester. Available in 15-22-32-68 and 100 viscosity. ISO VG 46
Product / Data sheets
Pentosin LHM+
Mineral hydraulic oil with high viscosity index specifically developed to the Citroen for the hydraulic brake and suspension system. The oil can also be used on agricultural machinery in such a type prescribed (Case, NewHolland / Fiatagri et al.)