skip to Main Content
Røedstien 5, 4823 Nedenes + 37 17 87 77 post@teknisksalg.no

Our industry lubricants are designed to provide highly efficient lubrication solutions for wide-ranging applications across the industry sector. INDUSTRIAL OILS are used for a wide range of industrial and mobile equipment, such as closed gears, chain gears, bearings, slides, hydraulics and compressors. The oil is equally effective when used for lubrication of small gears as for lubrication of large plants.

Texaform CR 3

Release oil with rust-proof properties. Can stand in the shape of up to 2 days. Prevents oil stains on the mold and rust on steel. Excellent as slip in concrete mixers and cars. Is easy to apply and can be removed by means of high pressure flushing. ISO VG 3

Product / Data sheets

Texaform PR 5

Odorless form oil that gives high surface finish. Can be used on both
wood, steel and composite molds. Especially suitable for indoor casting.

ISO VG 5

Product / Data sheets

Moulding Oil 10

Release oil with rust-proof properties, including for concrete-
handling.
ISO VG 10

Product / Data sheets

Industrial oils

Pinnacle EP 150-460

Fully synthetic PAO industrial oil with EP additives. FZG> 12.
DIN 51517/3. Very good low and high temperature properties.
High resistance to oxidation and degradation provides the opportunity
for longer shift intervals. Reduces internal friction in proportion
to conventional gears. This means lower operating temperature
and less energy loss. Recommended especially in drive boxes and
low speed rotary exchanger, especially high loads or high /
low temperatures, as well as on propulsion chains subject to somewhat higher
temperatures. ISO VG 150, 220, 320, 460

Meropa 68-1000

Mineral industrial oil with EP additives. FZG> 12.
For closed gears and drive cases, chains, bearings, couplings etc. Can with
advantage is used in circulatory systems with slip and roller bearings. Withstand
impact load. ISO VG 68, 100, 150, 220, 320, 460, 680, 1000

Meropa Synlube WS 150/220/460 (before Synlube WS)

Synthetic industrial oil for lubrication situations at very high load /
high pressure, and at very low or high temperatures. Synlube
WS can be used for permanent lubrication. Provides very good protection
against high pressure wear and micropitting. Based on polyglycol. Want
could absorb minor amounts of contamination of water and still
maintain oil film. ISO VG 150, 220, 460

DO NOT mix with mineral oil.

Cooling compressor oils

Capella HFC 55

Fully synthetic polyol ester oil with very good thermal and chemical
characteristics. Has very good miscibility properties for R 134a, R
404a and R507 systems. Suitable for food processing systems,
air cooling, heat pumps and in the transport sector.

Capella A 68

Synthetic PAO-based compressor oil for ammonia systems.
Especially suitable for freezing and cooling systems that make strict demands
to the oil’s low-temperature properties. PAO base oil also makes that
Volatility is significantly lower than for mineral oils. This gives
more efficient oil extraction and consequently lower consumption. ISO VG 68.

Product / Data sheets

Capella Premium 68

Semi-synthetic oil for ammonia plants. Good low and
high temperature properties. Very favorable combination of price and
quality. ISO VG 68.

Capella WF 46

Mineral oil compressor oil on naphtha base. For facilities with
ammonia or fluorine inert hydrocarbons as refrigerant. Both for
piston and screw compressors. ISO VG 46.

Product / Data sheets

Capella WF 68

Mineral oil compressor oil on naphtha base. For facilities with
ammonia or fluorine inert hydrocarbons as refrigerant. For
screw compressors. ISO VG 68

Product / Data sheets

Capella Low Temp AB 68 (before Refrigeration Oil Low Temp)
Fully synthetic refrigeration compressor oil with alkylbenzenes. For R 22 and
R 502 systems. The oil has excellent miscibility with CFC and
HCFC refrigerants, and is also very stable to this type
refrigerants. Not for ammonia systems. ISO VG 68

Air compressor oils

Cetus PAO 46

Fully synthetic air compressor oil, especially for use in
screw compressors working under difficult conditions and there
One wishes extended shift intervals, up to 4000 hours. Especially good
air separation ability. ISO VG 46

Product / Data sheets

Cetus PAO 68

Fully synthetic air compressor oil, especially for use in
screw compressors working under difficult conditions and there
One wishes extended shift intervals, up to 4000 hours. Especially good
air separation ability. ISO VG 68

Product / Data sheets

Cetus DE 100

Synthetic air compressor oil on diester basis. The oil is a lot
oxidation stable and with ISO VG 100 it is very suitable
at higher temperatures. Excellent also as hydraulic oil and
general industrial oil. ISO VG 100

Product / Data sheets

Compressor Oil EP VD-L 46

Mineral oil-based air compressor oil. DIN 51506 VD-L. Arrests
coke on valves and stamps. ISO VG 46 is recommended especially for
screw compressors. ISO VG 46

Compressor Oil EP VD-L 68

Mineral oil-based air compressor oil. DIN 51506 VD-L
Prevents coke on valves and stamps. ISO VG 68

Compressor Oil EP VD-L 100

Mineral oil-based air compressor oil. DIN 51506 VD-L
Prevents coke on valves and stamps. ISO VG 100

Anderol logo

Anderol 555

Synthetic diester-based compressor oil for air and a variety
process gases. Excellent for vacuum pumps and as cylinder and
crankcase in piston compressors. Nominal operating temperature
-15 ° C – + 210 ° C. ISO VG 100

Anderol logo

Anderol 755

Synthetic diester-based compressor oil for air and a variety
process gases. Also for cylinder and crankcase in
piston compressors, vane compressors and vacuum pumps
Nominal operating temperature -15 ° C – + 230 ° C. ISO VG 150

Product / Data sheets

Anderol logo

Anderol 3057M

Synthetic PAO / ester based compressor oil for air, helium and hydrocarbon gases containing acidic components, such as H2S. Particularly recommended for brake systems on trains. Nominal operating temperature. -20 ° C – + 205 ° C. Viscosity (ASTM D-445): 52.8 cSt at 40 ° C. DIN 51506; Knorr Bremse; Sab Wabco

Product / Data sheets

Chain lubrication

Anderol logo

Anderol Chain Oil XL 220

Synthetic special oil for lubrication of propulsion chains. Especially
good penetration ability. Provides very good protection even at high
speeds and changing high loads. See product data sheet for
material compatibility.
ISO 220

Air tools oils

Aries 100

Air tool oil for use in striking and rotating air tools.
Dust easily into lubricants. Gives a strong lubrication film with good
rust protection. For heavier mountain drills with own operation of
feed and rotation when the temperature is above 0 ° C. ISO VG 100

Product / Data sheets

Aries XLX 32 (Replaces Aries 32)

Air tool oil for use in striking and rotating air tools.
Corresponding properties as for Aries 32, but also counteracts
The ice cream that otherwise occurs at temperatures near 0 ° C and high
humidity. ISO VG 32

Product / Data sheets

Machine and van oil

Way Lubricant X 68

Special oil for hooks and guides on machine tools. With
Additives that prevent snoring and “stick-slip”. Both for newer
machines with friction reducing material on the sliding surfaces and the elderly
machines where steel to steel contact can occur.
Chlorine free and with EP additives. ISO VG 68

Way Lubricant X 220

Special oil for hooks and guides on machine tools. With
Additives that prevent snoring and “stick-slip”. Both for newer
machines with friction reducing material on the sliding surfaces and the elderly
machines where steel to steel contact can occur.
Chlorine free and with EP additives. ISO VG 220

Way Lubricant X 320

Special oil for hooks and guides on machine tools. With
Additives that prevent snoring and “stick-slip”. Both for newer
machines with friction reducing material on the sliding surfaces and the elderly
machines where steel to steel contact can occur.
Chlorine free and with EP additives. ISO VG 320

Metal Processing Oils

UnoCut Aqua 3010

Conventional water miscible cutting / cooling oil that gives milk white
emulsion. For sawing, turning, milling, grinding, drilling and threading of
light to medium machinable metals. Must be stored frost-free.

Product / Data sheets

UnoCut Aqua 6400 New

Water-miscible semisynthetic and biostable refrigerant lubricant added
effective high pressure additives. The product is extremely stable
microemulsion by mixing with water. Developed for medium and
hard processing of ferrous metals – including stainless steel,
aluminum alloys and oil resistant plastic types (eg nylon).
Does not contain PTBBA, secondary amines, phenols, sulfur, chlorine
the like Mixing ratio: See product data sheet.

Product / Data sheets

UnoCut Neat Plus 68 

Combined lubricant / cutting oil for most metals: such as steel,
aluminum and copper-containing alloys. Can also be used as
hydraulic oil. ISO VG 68

Product / Data sheets

T-Neat EDM Fluid H2 (Het tidl. EDM Fluid H2)

Special oil for sparking.

Product / Data sheets

Saw chain oil

Bio Chain Oil 68

Biodegradable saw chain oil adapted to Norwegian temperature conditions for year-round usage. The product is based on high refined rapeseed oil and contains no environmentally hazardous components that make it easy degradable. Also suitable for central lubrication systems for carriers, trials in forestry, chain operations on sawmill etc. and where it is danger of play in nature. Since the oil is just biodegradable should not open packaging saved more than 1 year.

Product / Data sheets

Clingtex 55

Withstands high flat pressure and provides good weaving ability on saw chains and swords on chainsaws. Can also be used for lubrication of operation, control and
transport chains where an oil with good adhesion is required.
Year Round Thickness.

Product / Data sheets

Clingtex 125

Same characteristics as for Clingtex 55 but slightly thicker
summer use.

Product / Data sheets

Transformer and switch oil

Transformer Oil Uninhibited

Upholstered transformer and switch oil on the naphtha base which provides
very good insulating and heat conductive properties. Very good
low temperature. Long lifetime.

Transformer Oil Inhibited

Transformer and switch oil on naphtha base with synthetic
oxidation inhibitor that provides very good insulation and heat conductivity
characteristics. Very good low-temperature properties. Long lifetime.

Heat Transfer Oil

Texatherm HT 22

Fully synthetic special oil for heat transfer. Both for cooling
and heating. Temperature range -50 to 320 ° C. Solves efficiently
deposits from previously used oils.

GST EP   (Replaces Regal Premium EP)

Newly developed and improved high-performance turbine oil primarily for gas, water and steam turbines, including systems with reduction gear.

Based on premium base oils and ash-free anti-slip additives that provide long lasting reliable protection. Premium base oil and the advanced additive package provide long-lasting oxidation stability, keep stocks working under high temperatures free of coating, very good water separation properties, silicone-free foam absorber that quickly separates air into the oil.

Suitable for: low pressure hydraulic systems, such as bearing oil, machine tools, vacuum pumps, electric motors, vacuum pumps, air compressors, turbochargers and centrifugal pumps that require rust and oxidation protection and wear protection additives. ISO VG 32, 46, 68. Siemens TLV 9013 04/9013 05 (ISO 32/46); Alstom HTGD 9017 

Product / Data sheets

Rust-proof oils

Metal Protective Oil L

Very thin-flowing rust protection oil for transport and indoors
storage of metal parts. Provides a non-stick surface that can easily be removed
with white spirit or alkaline detergent. The flats must be clean and
dry upon application.

OilCoat

Rust-proof oil with particularly good adhesion properties. very
good creep properties and water repellency. Apply with syringe,
cost. or by flotation.

Product / Data sheets